论文： [1] Jiliang Liu, Xinyu Zhang, Zhijuan Sun, et al. Experimental study and numerical analysis on mechanical performance of prefabricated concrete shear walls with various connection details[J]. Structures, 2026,89:112257. [2] Zhiqiang Zhang, Jiliang Liu, Yanjie Wang, et al. Closed-form solution for modelling the debonding response of CFRP-to-steel joints with randomly localized defects[J]. Structures, 2026,88:111660. [3] Mingjin Chu, Zhiqiang Zhang, Jiliang Liu, et al. Experimental Research on Mechanical Behaviour of Precast Concrete Shear Walls with Horizontal Joint Quality Defects[J]. Buildings, 2025,15(21):1-17. [4] Jiliang Liu, Baomin Wang, Mingjin Chu*, et al. Experimental study and numerical analysis of the seismic behavior of precast concrete shear walls with mortise–tenon joints[J]. Structural Concrete, 2025:1-12. [5] Liu Jiliang, Chu Mingjin*, Sun Zhijuan, et al. Experimental investigation on the mechanical behavior of a novel precast concrete shear wall system composed of serrate-edged panels and cast-in-situ concrete boundary elements[J]. Structures, 2024, 69: 107398. [6] 刘雷, 孙志娟, 刘继良, 等. 带竖向接缝装配式剪力墙易损性研究[J]. 工程力学, 2024, (S1)41:150-156. [7] 赵士瑞, 孙志娟, 刘继良*, 等. 不同榫孔构造的榫卯剪力墙受力性能对比分析[J]. 工业建筑, 2024: 1-17. [8] Jiliang Liu, Baomin Wang, Mingjin Chu*, Pengfei Zhang, Bo Wang, Influence of the Axial Load Ratio on the Mechanical Behaviour of Prefabricated Concrete Shear Walls with Mortise–Tenon Joints, Structures 53 (2023) 83–97. [9] 武盛韬, 初明进, 刘继良. 环形钢筋闭合连接性能研究综述[J]. 建筑结构, 2023, 53(23): 108-115. [10] 初明进, 熊赅博, 刘继良, 等.现浇边缘构件的装配整体式齿槽剪力墙抗震性能试验研究[J]. 工程力学, 2023, 40(11): 190-205. [11] Luo Peiyun, Liu Jiliang. An experimental study of the mechanical behaviour of squat shear walls built with precast concrete two-way hollow slabs[J]. Journal of the South African Institution of Civil Engineering, 2022,64(2):1-11. [12] 刘继良, 王宝民, 初明进，等. 不同轴压比下榫卯接缝装配整体式剪力墙受弯性能试验研究[J]. 工程力学, 2021, 38(11):79-87. [13] 孙志娟,初明进,刘继良*,等.配置不同空心模的预制混凝土空心模剪力墙受力性能试验研究[J].建筑结构,2020,50(22):32-38+118. [14] 初明进*,刘继良,侯建群,任宝双.带竖向接缝的空心模剪力墙受剪性能试验研究及承载力计算[J].工程力学,2020,37(01):183-194. [15] Chu Mingjin*, Liu Jiliang, Sun Zhijuan. Experimental study on mechanical behaviors of new shear walls built with precast concrete hollow moulds. European Journal of Environmental and Civil Engineering, 2019, 23(12):1424-1442. [16] 初明进,张庆池,刘继良* 等. 配置不同水平钢筋的自适应分缝剪力墙受剪性能试验研究. 工程力学, 2018,35(02): 214-220. [17] 初明进,刘继良,侯建群,等.预制混凝土空心模剪力墙受力性能试验研究[J].建筑结构学报,2017,38(12):32-40. [18] 初明进,刘继良,侯建群, 等. 无界面钢筋的叠合板式剪力墙受力性能试验研究[J]. 建筑结构学报.2016,37(10):90-97. [19] 刘继良,初明进,王 刚,等.预制混凝土空心模剪力墙受弯性能试验研究[J].建筑结构学报,2015,36(7):26-34. [20] 初明进,刘继良,崔会趁等.竖向接缝采用不同构造的装配式空心模板剪力墙受力性能试验研究[J].建筑结构学报, 2014,35(1): 93-102. [21] 初明进,刘继良,崔会趁等. 装配整体式双向孔空心模板剪力墙受剪性能试验研究[J].工程力学,2013,30(7):219-229. 国家标准： 《低多层农村房屋用承重保温一体化墙板及连接配筋技术要求》GB/T 46826-2025 CECS标准： 《预制混凝土构件机器视觉检测标准》T/CECS 1014-2026 《密拼装配整体式剪力墙结构技术规程》T/CECS 1628-2024 《装配整体式齿槽剪力墙结构技术规程》T/CECS 1014-2022 |
